Apron feeder manual

AF Apron Feeder. Introduction. Main features - The AF apron feeder has heavy-duty roller supports throughout the full length of the feeder and a double set of rollers in the impact area - All rollers are fully automatically lubricated - . A hydraulic take-up system ensures perfect and consistent tensioning of the chain. Two apron feeders can be combined to form a raw material blending system fileslib. The apron feeder receives the material by shovel and feeds the crusher of the mobile plant. Project figures 10,000 t/h Efficiency We're able to provide a wide-range of machines from standard sizes through to special heavy-duty machines with capacities of 10,000 t/h or more Service 2D/3D level control for highly dynamic environments - apron feeders and surge bins iApron™ is a highly reliable solution for monitoring filling height (including material distribution and surface contour) and volume in apron feeders, surge bins and comparable structures. The complex measurements are reduced to a PLC readable format. Terex Jaques D4 Apron Feeder D4 Apron Feeder Jaques® Apron Feeders use heavy-duty crawler tractor carrying rollers and chain, a fabricated support frame and high-strength steel head shafts and tail shafts. The lifetime of all parts is long, even under severe conditions, and maintenance requirements are low.
APRON FEEDER. Suitable for most robust applications and for absorbing heavy Impact Loads. ELECON has supplied appron feeders with capacity upto 3000 TPH and pan width upto 2.5 Meter. Documentation Product Enquiry Where to buy? They are of extremely rugged construction and are specifically designed to withstand the shock loading of large lumps
3 Apron Feeder Chain pitch inside track pin bushing wear to greater than 7 mm , the sleeve should be transferred to a new angle or replace the chain ; 4 plate feeder removing expansion sets , first loosen all the screws , but do not all of the screws removed, remove the galvanized screws and washers , the removed screw into