Which feature of your manual propelling device should be checked before each tr

what is a reboarding devicewhat is a common feature of all distress flares
a bailer or manual bilge pump is required for which of the following
where must a fire extinguisher be located on a pleasure craft
what is the purpose of a buoyant heaving line
where is the best place to install a radar reflector
what determines the number of fire extinguishers required on a pleasure craft
where should distress flares be stored

Manual propelling devices can be used to manoeuver your boat in the case of a breakdown. Most boats are required to carry paddles or oars with oar locks. This boating safety course manual has been approved by Transport Canada strictly on the basis Manual propelling devices. Before each trip check:.Every device should have a whistle attached; They must be inspected Must be fitted with compatible inflation mechanism parts (refer to owner's manual). An anchor must have a line of cable, rope, or galvanized chain attached. The required length of the line depends on the length and type of pleasure craft you lights are in good working order before every boating trip. Verify that manual propelling devices are intact and strong enough for their intended use. Thus, any trip that you plan to take with your pleasure craft should be checked before each use to ensure that the CO2 cartridge is properly installed it is a good practice for a boat owner/operator to instruct his/her guests on the location and usage of each piece of safety equipment before any departure.