Gea ecoflex plate heat exchanger manual

GEA Heat Exchangers GEA Ecoflex General Operation Manual Plate Safety at the plate heat exchanger General operating instructions 1.3 fileslib. What is gasket plate heat exchanger? In a gasketed plate heat exchanger, the plates are fitted with elastomeric gaskets which seal the channels and direct the fluids into alternate channels . The plate pack is assembled between a frame plate and a pressure plate, and compressed by tightening bolts fitted between these plates. How would you troubleshoot a plate heat exchanger with a leaking outside the unit? Leaking outside of the unit If this measure is larger than normal, the unit needs to be tightened, make sure to tighten all of the bolts equally . If this measure is correct, or the unit keeps leaking after it is tightened, mark which plates are leaking. Disassemble the heat exchanger and inspect the plates.
How are brazed plate heat exchangers made? Brazed plate heat exchangers have no headers, tie bars or sealing gaskets because the plates are furnace brazed at temperatures of 1100°C. During the assembly phase, a sheet of brazing material (generally copper but also nickel) is placed between the plates, the pack is pressed and subsequently baked for some hours .
Operating instructions Gasketed plate heat exchangers engineering for a better GEA PHE Systems is responsible for plate heat exchanger technologies.